Commercial Dog kennel - Calgary

The Survey crew shot and pinned the building footprints, in this case there were 5 buildings. Then we cut and removed the pavement plus an additional 2' each side for the SM frost protection required around the entire perimeter.

Bolt the exterior form channels then install all the High-Strength threaded bar in both directions, lock-nut on the inside of the channels, compression nut on the outside.  
Measure the width and length as you go, lock the nuts.
Level and square the frame.
Install the rebar to complete the grid.

This 20 x 150' foundation form was installed by 2 guys on top of the prepared bed, level, squared, and ready to pour, in 12 man hours.